Joined in 2023 
82 
63 About this deal
Once the nuts holding the seat in place are removed you can simply lift it away and free from the pan. What “wrap over” actually means is that the lid of the seat wraps over and covers the actual seat all the way down to the top of the pan. This is simply a case of lining up the holes on the seat and then dropping it down on the hinge pins. This bar has 2 blind holes and the method is to locate the spigots into the blind holes which also incorporate a tiny grub screw with an Allen head.
Toilet Seat Hinges and Fittings - Plumbers Mate Ltd
If you are thinking of changing your toilet from a close coupled to a low level toilet, take a look at the project we have on this, the old seat may not fit the new loo. For the purposes of this guide we are going to run through fitting a seat using bottom fixing bolts. If there is a hinge lock screw present, even if you don’t adjust the hinge, tighten the screw fully!To ensure that a toilet seat lasts as long as possible and supports anyone sitting on it, it is essential that the seat is supported by the pan at all the contact points. As we have said, the tricky part when it comes to adjustment is, especially with close-coupled suites, to ensure that the adjustment of the seat allows for both sections to be lifted and leant against the cistern whilst also allowing the seat to be supported at all contact points to the top rim of the pan. The first job is to insert the top fixing plugs into the fixing holes on the back of the toilet pan. The key parts of a toilet seat include the ring, lid, hinge, hinge plate and the seat fixing and are show in the diagram below. Here you will find a range of both plastic and steel toilet seat hinges as well as various spares to fit various toilet seats.
Ideal Standard Seat Hinges - My Toilet Spares Ideal Standard Seat Hinges - My Toilet Spares
As we have mentioned the first job should be to have a clean around and wipe away any dirt and grime to make the working area safer and a bit more pleasant to be in.
Over the years even the same shaped toilets have changed slightly in size so to allow for this and ensure that newer toilet seats will fit older toilets that may be slightly smaller, replacement toilet seat kits usually have adjustment to allow fitting to the older or non standard types as well. This can be easily fixed by adjusting the hinge position using the 3 options described in step 2 above. If there is no screw then adjustment needs to be made using one of the following methods if they exist. As plastic is a fairly tough, hardwearing and durable material they also last a good amount of time. Once it’s out of the way you can then thoroughly clean the whole area before refitting your new seat.
Great Deal 
New Comment