Fernox 56608 1L F5 Powerflushing Cleaner

Product Information

To view the purposes they believe they have legitimate interest for, or to object to this data processing use the vendor list link below.

The TF1 Omega Filter is not only compatible with all Fernox products, it is designed to act as a dosing point for any Fernox Express products. If you forget to drain it out, it doesn't do any harm (but it will lose its power and the dirt will re-settle after about 4 weeks). Fernox Cleaner F3 should ideally circulate around the system for at least one hour, or up to a week, after which it should be drained out and the system flushed/ cleaned before adding Fernox Protector F1 or Protector + Filter Fluid together with a Fernox TF1 Filter to protect the system from further corrosion and scale formation.

Leak Sealer F4 Express is recommended for all pressurised systems as this can be added in 30 seconds via a radiator, filling loop or Fernox TF1 Filter, without the need to drain the system. Preferably, full bore gate valves with hose connectors should be provided temporarily for this purpose.

If the dip test shows less than 100ppm, installers can immediately resolve the issue by adding a high-quality inhibitor such as Fernox Protector F1 or where a filter is fitted, Protector+ Filter Fluid.

However, if the system is especially dirty it is recommended to use the stronger Power Cleaner F8 which will have an increased dispersion effect, even at low temperatures. whats your current choice/preference of power flushing chemicals and inhibitor for systems with and without aluminium. cans of Fernox F5 Express into the system (volume 280ml + 140ml = 420ml) and advised me to keep the heating on as much as possible and to have the rads up full as the heat would help to break up the slugde. The fill and dump rate may need to be rebalanced when the flow is reversed due to differences in system resistance in each direction of flow.

Some of our partners may process your data as a part of their legitimate business interest without asking for consent. A thorough powerflush will improve heat distribution throughout the property, subsequently lowering household energy bills and increasing system reliability. I turned the heating off as my concern was that it would dump the Fernox F5 Express that had just been put into the system!I am forever having to bleed the pipework in the airing cupboard in the summer and then in the winter when the rads are on all the air/gas collects in the bathroom rad. A single dose of Cleaner F3 treats a larger sized property with a heating system of 130 litres, up to 16 radiators, or 250 sqm of underfloor heating.

With the initial dose, its key to make sure the system water is circulated properly so that the inhibitor is sufficiently mixed. You'll find that at first there is a significant amount to empty out after a week; then a month; and eventually no more than a smear after a year. DIY cleans may not solve all your problems, but they are unlikely to do anything other than good, and are very cheap and simple.

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. The F5 is a heavy duty, pH neutral cleaner which is designed to remove sludge, scale and debris in existing and /or aged systems. Additional/repeat applications of Cleaner F3 may be necessary for larger systems, or if systems are heavily sludged.