HP USB-C/A Universal Dock G2

Product Information

The DisplayLink macOS app or DisplayLink Manager app is a new way of enabling DisplayLink technology on macOS using a much simpler architecture. Today, the app is available as a standalone installer. In the future, the goal is to also distribute the app through the mac App Store to make deployment even simpler. If using the DL-3900 or DL-5900, which supports dual outputs, resolutions above 2048x1152 will be unavailable if a second display is connected. If wanting to use the DL-3900 with resolutions above 2048x1152, disconnect the second display.

Or follow the steps from TenForums: How to Add or Remove "USB 3 Link Power Management" from Power Options in Windows. Jumbo frames are not supported on DL-3xxx, DL-5xxx or DL-6xxx series Ethernet ports. Disable jumbo frames on any network with DisplayLink Ethernet ports connected, otherwise problems could be found with network behaviour. IMPORTANT: Make sure your Ubuntu distibution is up to date by running sudo apt-get update and then sudo apt-get dist-upgrade from a Terminal. If the distribution is not up to date, you may find issues with blank or corrupted USB displays. And I was even allowed to change the resolution up to the native resolution of the monitor (3840x2160px).does not store or record any screen content. If you enabled notifications from DisplayLink Manager, it All kinds of settings, GPU rendering ON/OFF, AMD Freesync ON/OFF, extent screen, duplicate screen, various resolutions and update frequencies. What active adapters do you recommend?We cannot recommend one over another but we do regularly use the following in our test lab: Monitors which have DisplayPort Multi-stream Transport (MST) should have this feature disabled when used as MST is not currently supported. There have been some instances of DisplayLink devices with a yellow "!" in device manager, and opening the properties shows that they have an error code 10. This has been either due to a faulty device, or due to a device with auto install (which are not supported as detailed below) and the DisplayLink video driver is trying to talk to the wrong interface putting it into an error state.

There have been some instances of DisplayLink devices with a yellow "!" in device manager, and opening the properties shows that they have an error code 43. This is usually due to a driver fault. To fix this error we recommend trying the following steps: are not supported by your DisplayLink device. T he table below documents the maximum supported resolution of DisplayLink ICs on various interfaces. ASIC FamilyPlease test with different headphones/speakers - This will confirm that there isn't an issue with the headphones/speakers The arrangement of the displays can be changed by dragging the screens to the correct position, to reflect the physical positions of the displays on your desk. Now it doesn't work anymore. I assume it stopped working after a Windows software update as i could not open the AMD Radeon software due to a mismatch between the real driver version and the version the AMD software thought was installed. At first it was not working. Screen was recognized both in Windows and in the AMD software as second monitor, but still no signal.