Joined in 2023 
82 
63 About this deal
Multi-Stream Transport (MST), also known as Daisy Chaining, is a new connection specification that allows multiple monitors to be connected in series with the video signal being passed from the computer to a monitor, and then from the first monitor on to the second monitor and so on. Welcome to the Dell U2415 FAQ. This section attempts to answer common questions you may have, please get in touch if you have any more queries or if you think our answers need updating. Before I get into the details of this monitor, I must confess that I bought one of these for my personal home office. Therefore this is a hands on review and reflects my own personal experiences of the Dell U2415.
Select On Screen Display (OSD) the DP1.2 enable/disable feature. Set the first monitor to DP1.2 enabled, set the second monitor to DP1.2 enabled and set the third monitor to DP1.2 disabled (if the third monitor is the last monitor). The first display will be your primary display and the 2nd and 3rd displays will be extended.I can report that the monitor remains cool and silent during use, no annoying buzzing sounds or anything like that. Performance To daisy chain more than two monitors, follow a similar sequence: The first monitor connects to the second, the second monitor connects to the third, and so on. Select On Screen Display (OSD) the DP1.2 enable/disable feature. Set the first monitor to DP1.2 enabled, set the second monitor to DP1.2 disabled and set the third monitor to DP1.2 disabled (and so on). The first display will be your primary display and the 2nd and 3rd displays will be cloned. ICC profiles and gamma corrections. The screen was tested at default factory settings using the DVI interface, and analysed using here how uniform the brightness and colour temperature was across the screen, as well as identify any
The monitor uses an IPS panel made by LG.Display (specifically part number LM240WUA-SSA1) capable of faithfully reproducing 16.78 million colours on screen making it suitable for those looking for high quality display performance. It is also factory calibrated for top notch out of the box performance, so if you are like me and just just want to plug and play, the U2415 starts to look an attractive option. Build Quality from the target of 2.2 which was reasonable. White point was measured at 6393k being close to the target of 6500k which was The reason for this is that the Intel HD Graphics driver requires a "terminator" signal in the chain to indicate the last monitor is the last monitor in the chain in which to extend (or duplicate) the desktop to. If there are three monitors in the daisy chain, then the first two monitors would have DP 1.2 enabled and the third would be disabled, and so on.box the screen used 20.0W at the default 75% brightness setting. Once calibrated the screen reached graphics card LUT from the profilation of the screen which was pleasing. You can use our settings and NOTE: Maximum achievable resolution in Daisy Chain configuration may be impacted by computer support for HBR2/HBR3 specifications. More information about computer models supporting HBR3 can be found in the following article: Dell Systems Supporting HBR3 Specifications We explain the terms you need to know and round up the best G-Sync, 144Hz, 1440p monitors out there right now.
colorimeter with a central point on the screen calibrated to 120 cd/m 2. Measurements for colour temperature (white point) were taken using All the modern connectivity is present, 2x HDMI (with MHL), 1x DisplayPort and 1x Mini DisplayPort but do note that if you are hoping to hook up an older card there is no DVI or VGA. Time for an upgrade! Or you could try a DVI to HDMI adapter. Here they have factory calibrated the default 'Standard' preset mode to a 2.2 gamma, 6500k white point and with a It is possible to chain together monitors with different display resolutions. For example, one 2560 x 1600 monitor could be used with two 1920 x 1080 monitors.The last monitor in the chain could even be an older DisplayPort 1.1 monitor (which only has a DisplayPort input), so long as the other monitors all have DP 1.2 inputs and outputs.normal operation and pulsates on/off white when the screen is on standby. Unlike some of the other UltraSharp screens we've seen
Great Deal 
New Comment