Everbuild Black Jack 901 | Solvent Based, Full Bodied Black Bitumen Paint - Protective Coating for Concrete Structures, Stone & Concrete Screeds - 5 Litre - Black

Product Information

Curing (hardening) time is up to 3 weeks in normal conditions. Treat gently until curing is complete. Exterior wooden surfaces in particular can retain moisture for up to 48 hours after rainfall or preparation. Ensure the items are thoroughly dry prior to painting.

Blackjack - Bold, True Black Al Fresco Furniture Paint | Frenchic Blackjack - Bold, True Black Al Fresco Furniture Paint | Frenchic

It is not wise to use bituminous paints on general painted surfaces. If applied over existing paint the solvent may soften the paint beneath. If subsequently painted over with an ordinary oil paint then it will bleed through. I consider this approach to painting to be similar to that of recommending PVA as a primer coat for an emulsion paint system. You may be storing up future problems. Wood is prone to expansion and contraction in a way that is not replicated in masonry, it is flexible. Manufacturers will take into account the natural characteristics of the substrate when formulating coatings for a specific purpose. This is especially true in the choice of binder and the modifications which may be made to it. We make every effort to match our online colour swatches to the paint, however, we cannot guarantee an exact colour replication as images can display differently due to screen types and device settings.

How to Paint Wooden Garage Doors

General purpose, solvent-based. waterproofing paint. Provides a hard wearing, protective layer on wood, metal and cement. Suitable for brush application only. Metal protection - corrugated iron sheets, fire escapes, stairways, ladders, storage tanks, gutters, downpipes, fences, railings, gates etc. It stays quite soft and gives a rubbish finish which is why it is probably not mentioned that it is for wood - though it can be used for it.

Everbuild 90105 Black Jack 901 Black Bitumen Paint 5 litre

Best results are obtained in warm (minimum 10°C), dry conditions and we recommend application of 2 coats. Use Conventional or HVLP spray, brush or roller. Our bitumen paint products We have also been asked what products can be painted over a previously bitumen painted concrete roof. Generally, it is fine to paint a bitumen paint over another bitumen product; if the reason for painting is to change the colour, then consider a bituminous barn paint like Carbolustre or Green bitumen paint. Usually cheaper than many other coatings offering similar weather proofing performance, it’s an economical optionHowever, I trialled this a number of years ago, and have since used it on both smooth planed timber fascias and rough sawn wood. Not only does it give a beautiful finish, but there have been no signs of flaking whatsoever, and all that timber is South-facing. Some trellis work which only received a single coat is now showing areas of weathering - but no flaking. A top-up coat can just be slapped on to the secure layer below. It’s frequently used on metal guttering, fire escapes, stairways, ladders, railings and fences. In the marine sector, bitumen paints are commonly used on boat hulls.

EVERBUILD® BLACK JACK® 901 BLACK BITUMEN PAINT

Always ensure you have enough paint for your whole project. When more than 1 tin of the same colour is needed, it is good practice to ensure batch numbers are identical or to intermix batches prior to commencing painting. Carbosil Bitumen Aluminium is for over-coating bitumen-based surfaces. It helps protect surfaces from heat/UV light damage, with a decorative coating and will enhance the lifespan of bitumen-type roofing materials. The flexible, heat resistant and solar reflective surface has outstanding weather resistance and durability. Ideal for use on roof structures, storage tanks, silos, mobile homes and caravan roofs. Reflects heat in the summer and insulates in the winter.Ready to use, this Everbuild paint should not be thinned and can be applied by spray or brush. A minimum of two layers should be added to the surface. The first coating should be left to dry before applying the second which typically takes two to four hours depending on weather conditions. Protect skin and eyes and apply in well ventilated areas outdoors, do not inhale. Do not apply near open flames, sparks, heat or hot surfaces. sources. Dispose of any waste responsibly as it is toxic to wildlife. Do not swallow. Would bitumen paint be suitable for protecting the underside of a steel trailer? Surface preparation required in addition to the above – clean with Frenchic Sugar Soap, rinse and dry thoroughly. Hand-sand sufficiently to abrade the surface. Wipe off any dust, paint away! For a great demonstration, see our video. We have a small canopy to a building that has two 200x200x6.3thk SHS steel columns bolted to concrete foundations circa 500mm below ground level.