Easy Joint Paving Jointing Compound 12.5kg – Buff Sand

Product Information

Easyjoint can be used in wet or dry conditions and is sold in a 12.5kg tub which will cover an average of 7m² depending on slab size and joint width. In my experience, it is an easy installation that takes about twice the time than a typical polymeric sand installation. I was certainly happy with the installation and the permeability of the product, especially for open graded bases. In tighter joints, it requires more patience to get the grains into the joints and may require a compactor to be able to achieve this or a thin tool to push it into the joints. A lot of water is required in the installation of this product and it is much easier with two or more people. A squeegee and / or soft bristle broom is required. The UK's best selling paving jointing compound, EasyJoint from Azpects makes it easier than ever before to give your paving a professional finish. At approximately three times the price of polymeric sand, this is not a product that you decide to use after pricing a project. It is not a spontaneous alternative to polymeric sand if on the day of the project it is raining and you then decide to use this as an alternative. It is definitely something you would want to price into the job to ensure that you are not eating into your profits. It also takes about twice the amount of time to install when compared to polymeric sand and is more difficult to install without more than one person.

Technically advanced: Years of research and continuous development of our jointing compound makes this a market leader. We sell tens of thousands of EASYJoint tubs every month throughout the UK and in Europe. No Waste: Opened tubs of EASYJoint, if not fully used, can be kept for later use providing they are covered by a minimum of 2" (50mm) or more of water. – There is no waste with our jointing compound, EASYJoint is an environmentally friendly product.Compact the pavers or slabs using a compactor with a protective pad to set them into the bedding layer prior to beginning the installation of the jointing compound. Smooth the joints: when drained and dried, lightly "point" or "strike" the joints with a suitable finishing tool Less Effort: The wash and sweep in application method makes it easy to use and jointing paving is faster than traditional methods The end results will be a perfect joint that is fully filled without need for kneeling and compressing the material by hand that will last for years and years.

EASYJoint is the UKs top selling paving jointing compound, favoured by professionals and DIY installers all around the world. Pre-wet the pavers or slabs and begin to work in small 100 square foot areas to install the jointing compound and pre-wetting the next 100 square foot area when you move onto it. You do not want to install this jointing compound onto a dry surface. Heavy Traffic Pro Jointing Mortar - 2-Part Epoxy Resin Mortar System - suitable for vehicle areas up to 7.5 tonnesOpen the container, rip the bag open, and pour it onto the paving surface. Immediately wet the jointing compound. We like to use a mixture of the shower and horizontal setting on the hose nozzle to move the jointing compound around the paving surface.

Continue to move the jointing compound around the surface filling the joints to 1/8″ below the top of paver or bottom of chamfer.EASYJoint is a very effective, super fast and aesthetically pleasing way to fill/complete joints between paving materials including slabs and pavers for example. The original jointing compound for all weather paving. It can be used rain or shine, at any time with an oustanding finish.

The result of using EASYJoint, to joint your paving, will be a paving gap that is completely filled without the need for kneeling and compressing the material by hand that will last for years. A strong joint that will resist the elements and stand the test of time - better than traditional jointing methods. Driveway Jointing Mortar - High Strength Epoxy Resin Paving Grout - suitable for vehicle areas up 3.5 tonnes Using small quantities of EASYJoint, simultaneously spread and wash the compound across the surface using a light jet of water and a broom/squeegee, allowing it to fall into the joints Use a squeegee or soft bristle push broom to move the jointing compound around the surface and water to move the compound to the bottom of the paver joint.

EASYJoint is the UK's top-selling paving jointing compound, favoured by professionals and DIY installers all around the world. This product was first developed in 2009 and has now evolved to meet user demands and keep up with the latest trends in the industry. The EASYJoint family now has 9 products within the range. I found that the shower or vertical setting on the hose nozzle works well with the installation of this product. When finishing the joints, a jointing tool may smooth out the surface of the joints to give a more pleasant look to the finish. The product should sit 1/8″ below the surface of the paver or bottom of the chamfer, whatever is lower. Jointing compound gives you an easier, faster way to seal the gaps between paving than traditional mortar joining. With no mixing required, jointing compound can typically be used in all weathers. Finish your patio, driveway, pathways and paved areas to perfection with our great value products from well-known brands, in a choice of colours and sizes.