Smedz CAT6 50 m Full Solid Copper UTP 24 AWG Indoor / Outdoor Plug and Play Network Cable GigaBit Ethernet Patch Lead – Black

Product Information

Available in 50m 100m and also 305m (1000ft) CAT6 Gigabit - Pure Copper Cable Approx 7mm diameter cable 4x2x0.56 Copper / 0.98HDPE + 4.5 Separator + 6.0PE UV resistant Those looking to really future proof their network might want to look at the newer Cat 8 standard, which supports speeds of up to 40Gbits/sec at distances of up to 30m using the same RJ45 connectors as Cat 6a. Predictably, though, it’s expensive and mostly used in data centres to hook up the most demanding high-performance network kit. Which category do you need? The Giganet Category 6 UTP outdoor cableis designed for optimal support of high-speed data protocols delivery up 10Gbps performance for a length of less than 50 M (Ideal small office networks )

Our kenable Cat 6 outdoor networking cable has FULL COPPER 23AWG twisted pairs and can be used indoor as well as outdoor. Its ideal for long or short runs and is UV resistant thanks to its PE sheath ensuring it wont erode over time like standard networking cables when left outside. Our Cat 6 cables are also waterproof and can even be buried underground! a b Kish, Paul (July 2002). "Category 6 Cabling Questions and Answers" (PDF). NORDX/CDT, Inc. Archived from the original (PDF) on 2015-09-23 . Retrieved 21 October 2013.

McLaughlin, Patric (2012-12-01). "TIA working on Category 8 standard". Cabling Installation and Maintenance. 20 (12) . Retrieved 2016-01-03. Whereas Category6 cable has a reduced maximum length of 55 metres (180ft) when used for 10GBASE-T, Category6A cable is characterized to 500MHz and has improved alien crosstalk characteristics, allowing 10GBASE-T to be run for the same 100-metre (330ft) maximum distance as previous Ethernet variants. The global cabling standard ISO/IEC 11801 has been extended by the addition of amendment 2. This amendment defines new specifications for Cat6A components and Class E A permanent links. These new global Cat6A/ClassE A specifications require a new generation of connecting hardware offering far superior performance compared to the existing products that are based on the American TIA standard. [9] The most important point is a performance difference between ISO/IEC and EIA/TIA component specifications for the NEXT transmission parameter. At a frequency of 500MHz, an ISO/IEC Cat6A connector performs 3dB better than a Cat6A connector that conforms with the EIA/TIA specification (3dB equals 50% reduction of near-end crosstalk noise signal power; see half-power point). [9] Full Copper Cable - Suitable for POE applications such as CCTV as well as high speed networking data transfer Suitable for indoor use. Voice, Data, Video Cabling, ISDN, etc Copper Category 6 Outdoor Cable – Giganet Giganet Outdoor Cat6 UTP / LAN Specifications

You can use RJ45 plugs but we would always recommend a punch style termination with solid core cable: ECA constructed cables are manufactured to meet the Construction Projects Regulation (CPR). A CPR Rated cable is tested for basic building regulation standards. This cable meets construction products regulations (CPR) which tests the cables reaction to fire and their emission of dangerous substances.Cat6 must meet more stringent specifications for crosstalk and system noise than Cat5 and Cat5e. The cable standard specifies performance of up to 250MHz, compared to 100MHz for Cat5 and Cat5e. [1] The Giganet Category 6 UTP cables are manufactured and tested to the TIA/EIA 568‐B.2‐1, EN50173‐1 and ISO/ IEC11801 Category 6 specifications. CAT6 patch cables, pure copper conductors, available in wire gauges 24 AWG and 26 AWG, our range also includes low smoke zero halogen LSZH, snagless and shielded CAT5e patch leads. Cat6 cable can be identified by the printing on the side of the cable sheath. [3] Cable types, connector types and cabling topologies are defined by ANSI/TIA-568.