Unbekannt 13cm Window Adaptor Tube Connector For Portable Air Conditioner Exhaust Hose Kit Plate

Product Information

Open the window and place the grille on the ledge, ensuring it extends all the way across the width of the window. You can remove the hose and cover the grille with the cap provided when the air conditioner is not in use. If you are living in an apartment without a window and want a long-term installation of your portable air conditioner, then venting through the exterior wall can be a good option. In this case, you have to hire a licensed HVAC contractor to make a hole in the exterior wall. After that, they will set up the exhaust port for proper operation. If your house has a chimney for decorative purposes, then it is also possible to vent the portable air conditioner via your fireplace. Just like other options, keep in mind to use the custom-made Plexiglas or the provided window adapter kit to cover the gaps between the fireplace opening and the exhaust hose. If your air conditioner has been carried upside down or roughly handled, you will need to wait 24 hours before you start the appliance for the first time. There is an internal safety mechanism that protects the appliance from turning on if the refrigerant is disturbed.

Choose a good temperature. Adults who are sitting still working or reading function best in rooms of about 22 degrees. If you’re walking about or exercising, then cooler rooms will be more comfortable. Resist the temptation to set the thermostat far below the outside temperature - instead aim for optimal comfort, not freezing rooms. Here, a portable air conditioner is permanently vented through a hole in the wall. This is ideal for offices and shops, where lots of hot equipment is used year-round and a continuous air conditioning solution is needed. Installation Tips

6. Vent through the exterior wall

The exhaust air hose adapter blends in perfectly with white windows and in this way makes dissipation of the warm air though the window almost invisible from the outside. Reasons for using the Trotec window nozzle: In the box, the EX100, AN112 Silent and AN97 Real Feel contain two window kits: one will suit sash windows, the other will suit double casement windows.

Follow the assembly of the hose as in steps 1-4 above. Then locate a good position for your hose. You will need to drill a hole of 134 mm in diameter through glass, a wooden door or the wall, so that it vents outside. The end of the exhaust hose will simply lodge itself securely in the hole. Getting Started This is especially important to ensure your machine can operate properly. Also, make sure that the flue is always open, and the chimney should be clean and free of soot. Otherwise, the air from your air conditioner cannot circulate well, which might result in a few serious problems. 6. Vent through the exterior wallFinally, please only turn your air conditioner on and off using the remote control or button on the appliance. Simply pulling the plug out disables your Pinguino’s ability to provide a proper shut down and may shorten the life of your air conditioner. On arrival, it’s essential to maintain that care. Ideally, two people should move and unbox a De’Longhi Pinguino. Also, please transport your Pinguino upright or on one side. Firstly, make sure to place the unit near both an electrical outlet and window. It’s best to choose an area with little plants or furniture to prevent the airflow from being obstructed. For the air conditioner to operate well, the gaps between the window sides and window adapter should be sealed off. 2. Vent through a sliding glass door