Bostitch B440SB stapler - staplers (247 x 120 x 123 mm, Black)

Product Information

There you have it – four different ways to staple a booklet depending on your preferences and needs. Take a saddle stitch stapler (commonly used for binding booklets) and position it at the center crease line.

Top Tip: Keep all important text and images within your safety area so they don’t get trimmed off when printed.

7 Comments

Save your artwork as normal, but then also save it as a PDF to embed text and images ready to send to us. To do this: Some booklet makers like the Duplo DBM-150, Kas 3000 and the Kas 640 also have optional trimmer units that can be added. Publisher is similar to Word, but it is design-specific, so it can be better for creating booklets. Clamp the two arms together with a c-clamp (or some duct-tape might also work) and drill the hole trough the u-shape, the width of the top arm, all the way trough the u-shape again. When it comes to creating professional-looking booklets, the saddle stitch method is often the go-to choice.

Some stapling machines can do both by raising or lowering the table and accepting a range of staple sizes. The Rapid 106, Nagel Multinak FS, Nagel Multinak S and Grafcut X-14 are a few examples. You get a lot more options to play with in Publisher compared to Word, like drop capitals, columns and text direction. Experiment a bit to find what’s right for you. Function. Not every office needs to have the ability to bind magazines, booklets, brochures, and other print materials.Microsoft Word is a great piece of software to use if you’re just getting started with design and, what’s more, plenty of people already have access to it. Follow these steps to create an eye-catching booklet for your business: So how do you find the best saddle stapler? There are certain features that you’re going to want to look for when shopping for the essential office tool. When we put the top arm on top of the bottom arm in the u-beam, we can mark where to drill the hole to make it hinge. To make the hinge we will need an U-beam that just fits over the arms. I had some aluminum square-beam where I could cut the U-beam out of.