PYRONIX ENFORCER TWO WAY WIRELESS KEY FOB KF4-WE

Product Information

The control panel may be transmitting data to the PyronixCloud, wait a few seconds then try again. If the problem persists the panel may have lost connection to the Cloud, perhaps the internet connection is down. If the system is connected via Wi-Fi, the panel may have disconnected from the Wi-Fi network or the signal strength is too weak. Your panel is designed to automatically inhibit certain functionality. The factory default settings are shown below: Receive notifications via SMS text messages of any incidents within your home in real time. This can be programmed to send a notification in different situations: System is armed or disarmed: Notification that your child has returned home from school safely. Alarm activation: Notification that the alarm has been triggered, allowing you to monitor your home from anywhere in the world.

A system must first be polling the PyronixCloud before it can be registered; this means the communications module must be correctly configured. For example, if you would like your gardener to have access to the garage but not the rest of the house, you can set it so they can only unset the alarm for that area. Assign different actions to the key fob PLEASE NOTE: Any proximity tags that are to be used on a standalone tag reader must have flexi-set set to ‘No’. Press or to scroll to ‘EDIT USERS?’. Press Compliant operation is only guaranteed when installed and operated according to the relevant installation and user manuals.HomeControl2.0 also delivers voice notifications alongside the push notifications simultaneously to make sure you never miss an incident, whether this be your alarm disarming, perimeter breached or panic alarm you will be the first to know.

PLEASE NOTE: For instructions on adding a key fob please refer to the manual provided with the product. When an area or level is armed, if an zone is triggered, the system will follow the appropriate (programmable) actions. Please note: The Master Manager code allows access to all the options above. A ‘user code’ has access to the ‘User Menu’ which includes the functions: ‘OPERATE USER OUTPUTS’, ‘CHANGE CODE’, ‘REVIEW LOGS’, ‘WALK TEST’, ‘SIREN TEST’, ‘ALLOW ENGINEER MENU’, and ‘EXIT USER MENU’. This wireless alarm system has been engineered to be secure, reliable and easy to use. It includes the following features: Enter the new code or present a tag. Once ‘asterisks’ appear, the tag or user code will be now assigned to this user. Press .Advanced technology preserves the battery life of each wireless device. However, the system informs you when a battery needs replacing up to a month in advance before the device stops working. This key feature gives you enough time to change the battery in the specific device. Conventional wireless alarm systems may not give you a low battery warning signal, meaning that devices could stop working, leaving your environment unprotected. If you have changed your broadband provider and have a new router, the control panel will need reconnecting to the router with the new Wi-Fi credentials. If you have not changed your router try resetting it, this often fixes connection problems. If you have changed the router, or resetting the router does not work, follow the instructions in the video below to re-establish a connection. If an invalid tag is presented 6 times without a valid tag presented, the respective keypad or reader will be disabled for 90 seconds. After reinstatement, this state will be repeated after 2 invalid tags are presented to any reader. A group of zones assigned to be active when that particular area is armed. This is usually named ‘Area A’ or renamed to a personal choice such as ‘Full Set’ or ‘Shop’. It is possible to allocate different functions to each keyfob such as arming/disarming different areas, activating outputs, requesting system status, and activating panic alarms. Up to 32 wireless keyfobs can be added to the

If SMS text is enabled, there will be up to 10 mobile numbers that can be programmed to send SMS alarms. Please discuss this feature with your engineer if required (THIRD PARTY SIM CARDS ONLY). For example, the DIGI-Wi-Fi module this must first be connected to an available Wi-Fi network. Please see the video here ( https://bit.ly/2UWy5SB) for a tutorial regarding DIGI-Wi-Fi programming. This option will change depending on which modem is installed in the system. It could display: ‘WI FI SETUP’, ‘GPRS SETUP’ or ‘LAN SETUP.’

Programmable to automate blinds, doors and gates

I arrive home, open my car window, press the remote "off" button ( nearer to the panel than the wireless garage PIR). The remote shows a green light telling me the signal has been sent (but not received?). I open the garage door, drive in, alarm sounds. When an area or level is disarmed, the panel will not react unless specifically programmed to do so. Alarm activation: Notification that the alarm has been triggered, allowing you to monitor your home from anywhere in the world.