Gizzmo 4101 Regular Original Above Ground and In-Ground Swimming Pool Skimmers

Product Information

Better to just put an empty bottle in the skimmer opening and then pack the skimmer with pool noodle pieces and screw the skimmer cover on. Built for 1-1/2 to 2-inch skimmer inlets, this guard is an economical investment that will save you time, money and from worry.

With an IG pool and a cement deck, I think I'll use gizmos even if I find a way to keep the skimmers high and dry every winter just in case. Then they used to have to remove the light and drop it to the bottom of the pool because if the pool water froze, it might expand and actually crack the light.Then simply place the gizzmo inside the skimmer and cover it with skimmer cover and put a heavy brick on top of the cover. The Ultra GIZZMO features double threads with rubber gaskets; a blowout tube with a rugged cap and generous lug style grips around the top for easy handling and convenience. Of course, mesh covers allow water to p*** through so the skimmer will fill if no aquadoor is in place. If you are using the green Gizmos to plug your skimmers, check them out and make sure that they are not cracked. This will give a good seal and allow you to blow out the entire system from that one spot – but this is up to you.

The only time that a swimming pool needs to have the water lowered is if you have a gunite or cement pool with tile around the top, you know, at the water line. I've been told to make sure I take the cover off the skimmer so that snow and ice can't build up on top.The anti-freeze can cause a mess in the spring when you go to start your system and it gets sucked into your filter and blown back into the pool. I've noticed that the people responding to the 2 threads are talking about IGPs and AGPs yet we're not specifying which kind is being talked about (I realise that some people have specified), which may be part of the confusion, I base most of my comments on IGPs, esp when the type of pool isn't specified - maybe we should all add afew more words to our posts defining which type we're addressing - at least for the closings, the two close quite differently and what applies to one is totally wrong for the other. Warranty Coverage: Marketing World Pool Products Winterizing Accessories come with a 30 Day Limited Manufacturers Warranty. You can let the water in the pool go down to the bottom of the skimmer if you like – then you do not have to plug the hole at all. Most pools covered with this type of cover will remain clear until April or May, depending on the weather.

Reddit and its partners use cookies and similar technologies to provide you with a better experience. Recently a gizmo in one of the in-ground pool skimmers snapped off at the neck where it is srewed in. simply put gizmo in the skimmer box and put some pool noodles to fill, plus screwing the skimmer cover. Tightness: The springs and straps on your cover will need to be adjusted from time to time, especially during the first few seasons of use.The use of gizmos prevents the skimmers from cracking, plugs the pipes and allows the water level to remain high for the cover so that rain water does not cause a lake on top of the swimming pool cover – possibly causing it to fall in. Remember, if your cover was declared legally dead a few years ago then patching probably is not the right thing to do !

Even IF the water level comes up enough to spill into the skimmer, any water that spills through will immediately drain out of the hole in the bottom.

The simple, easy-to-install Deluxe Pool Skimmer Gizzmo will protect the skimmer in your in-ground pool from freezing during winter months. I doubt you will have problems in NY (Assuming you are in Long Island) as the weather is not that severe where ice expands with tremendous force. AFTER POOL WATER LEVEL IS BELOW SKIMMER, SCREW THE ULTRA GIZZMO INTO EITHER 1 1/2" OR 2" THREADS UNTIL SECURELY SEATED IN SKIMMER.