Tom Hardy The Dark Knight Rises Bane Vest Costume Faux Leather

Product Information

A5. Yes, a yoga ball or exercise ball of similar size to the one used in this DIY guide can be used to sculpt the Bane mask. Q6. Will I need a lot of crafting tools? After that I made the sides of the mask. To make these I cut out two roughly rectangular pieces of foamie, then I cut down the top to match the movie. Once this was done I traced these onto another foamie piece, then cut about 1cm inside of where I traced, so it would be smaller. Once this was done I cut out a hole onto the the larger piece, in the shape of the ones on the movie mask, using an exacto knife. I then traced the hole onto the smaller piece, then cut it out about 1cm larger.

Cut the foam into small hexagons (honeycombs) with various sizes. Use the hot glue gun to affix them to the vest in a honeycomb pattern. Step 3: Weather the Vest Leather garments should be stored flat or hung, as folding can lead to permanent creases or wrinkles. Products Attributes: After that I started to make the tubes for the mask. I stared with the ones that go onto the mouthpiece. Bane, the infamous villain from the Batman franchise, is recognized for his massive muscles and intimidating mask. If you are looking for an impressive costume to wear to a Halloween party, a cosplay event, or comic book conventions, the Bane costume is an excellent choice. In this DIY guide, we’ll show you how to create your own Bane costume step-by-step, from making the mask to fashioning the vest. Materials needed for Bane Costume DIYA1. Depending on the skill level, the project will take between 7-14 hours. Q2. How much does it cost to make the Bane costume? A4. Yes, the Bane vest can be worn during the summer as it is lightweight and comfortable to wear. Q5. Can I use any yoga ball size?

The vest was started by using a vest I bought at a Thrift store as base. Because the vest was meant to be jipped up I had to make it wider by adding some fabric to the front of the vest. I made sure I could get it on over my head. Place the plastic container on the yoga ball to create a 3D shape. Mold and sculpt the plastic with your hands to create a rough Bane mask shape. Step 3: Carve the Eye Holes First, put the wig cap on to the base of your head. Second, fit the balaclava over your entire head with the eye holes aligned over your eyes. Then put the mask over the balaclava. Tips and Best Practices for the Bane Costume DIYThe Dark Knight Rises is a new action thriller American movie that casts astonishing actors and actresses in it. Furthermore, Christian Bale, Anne Hathaway, Joseph Gordon-Levitt, and many other prominent personalities portray great roles in their character in the film. Among them, Tom Hardy is playing the amazing role of Bane in this astonishing movie. However, he is a wonderful English actor, screenwriter, producer, and formal model. These pieces where then attached to the respirator, buy gluing fabric the the respirator, then the sides to the fabric. A foamie piece was then cut out in the shape of the top of the mask, which was then covered in a canvas piece cut out a bit larger than the foamie, so it overlapped onto the bottom of the mask. The 1/2" electrical tubing was then cut in half down the sides, and glued onto the sides of the canvas, on the top of the mask. With the tubing on the ends of the noisemakers were cut off, then cut in half and glued onto both ends of each of the tubes. I then cut out 8 identical foamie strips to go over the tubes, and 1 larger for the front part. After the strips were added I glued the noisemakers on the front of the tubes to the clay on the respirator

I started by cutting out paper templates, and trying them on to get a rough idea of how to start the headpiece.A3. Absolutely. In cosplay events, this mask is great for representing Bane’s appearance. Q4. Can the Bane vest be worn during the summer?