VCE (Gen 1) 25 PACK Cat7 Shielded RJ45 Connector Cat6A Modular Plug Blue

Product Information

It’s a dead standard that isn’t going to see any further adoption and its benefits are easily matched and outweighed by competitor cables, like Cat 6A, or the latest and greatest, Cat8. In this guide, we’ll look at some of the key features and applications of Cat 7 cable, and how it builds on the previous capabilities of the preceding Cat5 and Cat6 Ethernet standards. I see indications that I need 8P8C connectors, but I thought these were the same as ARJ45; and at any rate, I cannot find 8P8C connectors that do not also describe themselves as ARJ45.

If the wire OD is too thin, the wire will slide inside the load bar, making it impossible to crimp properly, and if the wire OD is too thick, the wire will not be inserted into the load bar.Cat7 Cables are installed into the fabric of the building however, Cat6a termination modules are used.

T his term is used to denote the generation of Ethernet cable, which in turn tells you a lot about its performance potential and the level of shielding it has to prevent crosstalk and exterior noise. In this scenario, two wiring schemes (T568A and T568B) are used to terminate the ends of the twisted copper pairs found inside the jacketing of a Cat7 cable onto the RJ45 connector interface. As noted above, the jump in potential bandwidth performance between Cat5 and Cat7 Ethernet cable is stated as being in the region of around 6x improvement. Cat7 and Cat7a 10 Gbps Ethernet cabling is widely used across a number of industries demanding high performance networking and data transfer infrastructure. This can include anything from temperature extremes and UV/moisture exposure, to direct contact with a wide range of solvents, oils and chemicals, making Cat7 wire an equally ideal choice for robust outdoor applications such as railway cables.Like some of the Cat 7 Ethernet cable’s earlier battles with Cat 6 and Cat 6A, it ultimately doesn’t stand much of a chance against Cat 8 cables.

I've got cat7 through the house which came with RJ45 connectors, which was necessary at the time because of less than ideal router location requirments and distance. Cat7 cables are also compatible with the TERA connector , although that has also seen very little use in the industry. Unlike CAT 5/6a where the connector fits almost wholly inside the socket with just the cable and protective boot or moulding coming out and able to bend, the TERA connectors stick out from the socket by a good inch before the cable comes out and the connector is solid/rigid and so when pressure is applied to the sides, e. As a result, cable Cat7a as a standalone revision isn’t officially supported by very much equipment to run at significantly faster speeds than Cat7 versions, although speed boosts may be possible in certain applications.

If GG45 or ARJ45 (or something else) ever catch on, I'd re-terminate my wall jacks and patch panels at that time. Let's say you live in Chattanooga, Tennessee though and you've just upgraded to the fastest residential internet service in the country at 25Gbps. Although designed with that 10 Gbps bandwidth in mind, Cat 7 actually proved even more capable in real-world use, with some high-quality Cat 7 Ethernet cables able to transmit up to 40 Gbps over 50 meters, and 100 Gbps over 15 meters. What you have is more than fast enough and the standard shielding of both cable standards is perfect for home use.

However, since your switch can probably already hit its maximum capabilities over Cat 6 shielded cable, it's safe for them to say it works with Cat 7 cable, because Cat 7 is as good or better than Cat 6 in all respects, so the extra quality is just a bonus.At 300', you're approaching the maximum spec for Ethernet (100m OR 328'); THE 100m is an end-to-end spec, including all patch cables. It will be laying this 300 foot Ethernet cable on the ground and through some weeds etc and it WILL be exposed to rain and about 100 feet of it will have constant direct exposure to the sun the temperatures range from 35°-75°-110° in East County San Diego (no snow). The newest revision may well become a viable option for more general use in due course, but currently, it’s not recommended for most scenarios in which a standard Cat7 version would be expected to perform well. But the magic of that higher number means that comparable cables of lower categories are occasionally mis-sold as Cat7 cables instead.